Recessed can light is blinking

Most recessed light fixtures contain a thermal cutoff device that cuts power to the lamp if the temperature exceeds the rating of the fixture. This usually occurs when a bulb is replaced with one of a higher wattage than is recommended for the fixture. When the temperature in the fixture cools, the thermal cutoff device will reset and the lamp will come back on. Installing the correct wattage lamp for the fixture will cure this. If you have any additional questions, give Voltek Electric a call at 262-224-3226, or you can reach us through our online contact form.

Recessed Can Trim 2 Recessed Can Trim 1